Watty

3D Printing

3D Models for 3D Printing

I model and print my own fittings for kites as well as other accessories and tools. Feel free to do what you want with these models, as they fall under the WTFPL license.

If you like these models and want to give me a thank you, feel free to drop me a donation here:

Spreader Spine Connector (Cross Fitting)

Description

Models for connecting the spine to the lower spreader on sport kites.

Resources:

Name Description
8mm Donut.stl A simple donut with an 8mm internal diameter. I've used this to connect a 4mm spine with a single-piece 4mm lower spreader.
6.4mm x 4mm.stl A fitting where one hole has a 6.4mm internal diameter, and another hole has a 4mm internal diameter.
7.5mm x 6.5mm.stl A fitting with two holes: one with a 7.5mm internal diameter, and one with a 6.25mm internal diameter.
7.5mm x 7.5mm.stl A fitting with two holes, and each hole has a 7.5mm internal diameter.
Fusion 360 Project

Printing Notes

I print these using Sainsmart 95A TPU with 100% infill and no supports.

Spencer WatsonComment