Watty

3D Printing

3D Models for 3D Printing

I model and print my own fittings for kites as well as other accessories and tools. Feel free to do what you want with these models, as they fall under the WTFPL license.

If you like these models and want to give me a thank you, feel free to drop me a donation here:

Spreader Leading Edge Connector

Description

Fittings for dual line sport kites that connect the leading edge to a lower or upper spreader. Inspired by APA fittings.

Resources:

Name Description
4mm x 4mm.stl Both holes have a 4mm internal diameter.
7.6mm x 5.6mm.stl Has a 7.6mm hole for the leading edge, and a 5.6mm hole for the spreader.
7.6mm x 6.6mm.stl Has a 7.6mm hole for the leading edge, and a 6.6mm hole for the spreader.
8.5mm x 6.6mm.stl Has a 8.5mm hole for the leading edge, and a 6.6mm hole for the spreader.
Fusion 360 Project This project uses variables for the two spars, so you can just change those variables to fit whaever size spar you want.

Printing Notes

I print these using Sainsmart 95A TPU and no supports. I recommend using 2 layers on the wall and 50% infill so that they are a little bit softer.

Spencer WatsonComment