Gripping Joiner
Description
This is a model for adding gription to a metal fitting. It is a tube with a single hole that changes diameter somewhere in the middle. I place this on the end of an aluminum tube, then place a rod trough this fitting and through the aluminum to have a fitting that holds the rod well, but doesn't bend.
Resources:
| Name | Description |
|---|---|
| 6.4mm x 4mm | A version with a 6.4mm internal diameter hole joining to a 4mm internal diameter hole |
| Fusion 360 Project |
Priting Notes:
I print this with Sainsmart 95A TPU, on its side with 100% infill and no supports.
